Predator 420 and 459 alternator bracket

Made and designed here in the USA, an alternator bracket that's made for high amperage applications in both golf cart and other vehicles/bikes that utilize the big block 420 and 459 PTO output flange pattern. Cut from 8mm Hot Rolled steel and T-braced. this bracket will ensure a long life against the demands of a high amperage charging system. Designed for the SN10 alternator (pictured is a 105 amp alternator), no external voltage regulators or excite wire signals are needed. All you need to apply is the power wire to the battery, crank it up, and roll on. Designed with you in mind, this bracket can be clocked in the 9 and 12 clock position and is slotted to allow you to take it down to the shortest distance possible right above the governor rod ( you will have to cut off one of the fuel tank support arms), or if mounting at the 9 clock position, it mounts just beyond the starter solenoid. Once purchased, there will be a sheet listed with the correct belt length, bolt lengths, and part numbers to ensure you get the correct kit, the first time. Thanks for checking it out! If you have any questions, feel free to send an email to fnfab@gmail.com. Currently taking pre-orders. Please allow 4-6 weeks for product to arrive at your doorstep.